Sunday, 27 September 2015

Mod Podge on Hardback Notebooks - Decorating the cover!


This week, at Mencap, we decided to try our hand at using Mod Podge...!

What you will need...

Deciding that working on a flat surface was the best choice for a first attempt, we bought some A5 Hardback Notebooks.

A Bottle of Mod Podge Gloss 

Some Sponge "Brushes"Image result for sponge brush

We decided to use some fairy and woodland cutouts we had and some craft paper that we use for backing paper, on greeting cards. 

(Mod Podge works best on fairly thick paper we found - sheets of thin paper wrinkled a lot - sometimes this is a desired effect, but not for our project)  

How to do it...

We found Mod Podge Rocks a very useful site, with loads of tutorials - here is the link...explains how to use Mod Podge far better than I can!

 Learn How to Use Mod Podge

So enjoy using this wonderful product - don't worry if it looks white and patchy when you finish your work - by the next day it will have dried clear and bright - very rewarding! 











Saturday, 19 September 2015

Paper Plate Dream Catcher Tutorial - Easy and fun to make!

These Paper Plate Dream Catchers are great fun to make and easy for any age and ability...

You will need... 

A good quality paper plate -  needs to be rigid enough to keep its shape

A length of Yarn - we Used Cotton Yarn DK - 2.5m plus 2 or 3 pieces for the dangles - each about 40cms long - Also about 30cms to make a tag to hang it.

Beads with large holes - we used Pony Beads

Feathers - dyed ones available at craft shops

Colouring-in pens or paints

Punch to make holes 

Sticky Tape

How to make... 

Cut out the centre of the plate.

Punch holes around the inside hole as per photo - about 2.5cm apart - no need to measure - don't have to accurate!

Working on the "bottom" surface of the plate - colour or paint the decoration - our plates had ridges which added to the effect!

Take your long piece of yarn and secure one end with sticky tape to the inside of the plate.

Thread the yarn through the holes - back and forth - no fixed pattern - just as you like! When about two thirds through, thread some beads onto the yarn (see photo above) 

When all the holes are used up, secure the end again with sticky tape, on the inside of the plate.

Punch a hole centre top and make a loop to hang up your Dream Catcher.

Punch two or three holes along bottom edge for dangles...

Tie a bead about a third of the way down on your yarn - then thread beads onto the longer piece above the tied bead.

Thread the end of this yarn, above the beads, through the punched hole and secure with sticky tape inside the plate.

Repeat with other one or two dangles.

Tie feathers onto the ends of yarn below the beads.

Sweet Dreams!
Nicola with her Dream Catcher

Andy painted his Dream Catcher with Acrylics
























 

Monday, 14 September 2015

Beach Hut Birthday Cards Tutorial - Summer Activity!

Caroline and Paula's cards
 As we started the last term of the year at Mencap, we decided to make Beach Hut Birthday cards - a last bit of Summer fun, by the look of the changing weather, here in Essex...Autumn approaches!

What you need...

Blank greeting cards (rectangular shape)
Coloured paper 
Thin card (for the door)
Happy Birthday wording - stickers or print my sheet out here
Colouring-in pens 
Glue stick
Seaside theme stickers (optional)

How to make...

With the card folded, make a mark on the top edge, half way across. 
Make another mark on each side of the card, about a third of the way down.
Draw a line from these side marks to the top mark and then cut, to make the roof shape.

Cut a rectangle of thin card for the door.

Cut strips of coloured paper for the stripes on the roof and walls. Cut them about 1cm longer than you need.

Using a glue stick (any glue actually will do) stick the coloured strips of paper onto the roof and walls. (Leave some white stripes showing if you like)

Let the ends of the strips stick out from the card. When dry, turn the card over and trim the strips back to the edges of the card.

Glue on the door.

Colour-in and attach the "Happy Birthday" and apply the seaside theme stickers.


Nicola made this bright card!

 Enjoy making these Beach Hut Birthday Cards with your group...