You will need...
A good quality paper plate - needs to be rigid enough to keep its shape
A length of Yarn - we Used Cotton Yarn DK - 2.5m plus 2 or 3 pieces for the dangles - each about 40cms long - Also about 30cms to make a tag to hang it.
Beads with large holes - we used Pony Beads
Feathers - dyed ones available at craft shops
Colouring-in pens or paints
Punch to make holes
Sticky Tape
How to make...
Cut out the centre of the plate.
Punch holes around the inside hole as per photo - about 2.5cm apart - no need to measure - don't have to accurate!
Working on the "bottom" surface of the plate - colour or paint the decoration - our plates had ridges which added to the effect!
Take your long piece of yarn and secure one end with sticky tape to the inside of the plate.
Thread the yarn through the holes - back and forth - no fixed pattern - just as you like! When about two thirds through, thread some beads onto the yarn (see photo above)
When all the holes are used up, secure the end again with sticky tape, on the inside of the plate.
Punch a hole centre top and make a loop to hang up your Dream Catcher.
Punch two or three holes along bottom edge for dangles...
Tie a bead about a third of the way down on your yarn - then thread beads onto the longer piece above the tied bead.
Thread the end of this yarn, above the beads, through the punched hole and secure with sticky tape inside the plate.
Repeat with other one or two dangles.
Tie feathers onto the ends of yarn below the beads.
Sweet Dreams!
Nicola with her Dream Catcher |
Andy painted his Dream Catcher with Acrylics |